This antenna mount is designed to fit the left side hood for 1997 to 2003 Ford F150 Pickup Trucks. Made of stainless steel and includes lug style terminal connectors. A very clean installation for your Ford Pickup Truck.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik K-24 mount is similar to the FireStik 3-way mounts without the clamp. If you know that your installation will not require the clamping bracket supplied in the 3-way mounts, you can save a couple of dollars with these mounts. This mount is specifically used for mounting antennas to a flat vertical surface, such as the side of a van or motorhome. These brackets are made from cold rolled steel and are finished with chrome plating.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik K14BM Ball mount is one of the most versatile mounts made for antenna mounting. The split ball design allows the mount to be installed on any vertical or horizontal surface, regardless of the angle of the plane, while allowing the antenna to remain in the desired vertical position.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik K154A mount are very similar to, but more compact than a disc stud mount. The small 1-1/4" x 2-3/4" rectangular mounts can be used for trunk, roof, and fender applications. Mounts include rubber gasket to protect vehicle finish. Complete with K-4A SO239 stud for PL259 connection.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik K24A mount is similar to their popular 3-way mounts without the clamp. If you know that your installation will not require the clamping bracket supplied in the 3-way mounts, you can save a couple of dollars with these mounts. All of these mounts are specifically used for mounting antennas to a flat vertical surface, such as the side of a van or motorhome. These brackets are made from cold rolled steel and are finished with chrome plating.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik SS134 stainless steel mount is specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, this mount can be used in other applications as well.
The upper bracket is 4.6" long by 1" wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4" wide. If the lower clamp is omitted, the upper bracket will also serve as a flat mount for installations with a horizontal surface to bolt it to. Mounting bracket comes complete with the FireStik K-4 antenna stud. (Lug terminal connection).
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik SS134A stainless steel mount is specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, this mount can be used in other applications as well.
The upper bracket is 4.6" long by 1" wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4" wide. If the lower clamp is omitted, the upper bracket will also serve as a flat mount for installations with a horizontal surface to bolt it to. Mounting bracket comes complete with the FireStik K-4A antenna stud, (for PL259 connection).
For further product information click on the product image (on the left) or the underlined product title (above).
Welcome to CB Radio Store 
