The FireStik K124A mount is FireStik's most popular mount for flat surface applications. Applications are, for the most part, limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket itself is about 4" long by 1" wide.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik SS-124 mount is one of FireStik's most popular stainless steel mounts for flat surface applications. Applications are, for the most part, limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket itself is about 4" long by 1" wide. The supplied stainless steel mounting bolt is a hefty 3/8"-24 by 1" long and includes a stainless steel nut and washers. This mount may be used with antennas up to 4' long. The SS-124 mount is complete with FireStik's' K-4 antenna terminal lug stud connector.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik SS-124A mount is one of FireStik's most popular stainless steel mounts for flat surface applications. Applications are, for the most part, limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket itself is about 4" long by 1" wide. The supplied stainless steel mounting bolt is a hefty 3/8"-24 by 1" long and includes a stainless steel nut and washers. This mount may be used with antennas up to 4' long. The SS-124A mount is complete with FireStik's' K-4A antenna SO239 stud connector for PL259 connection.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik SS134 stainless steel mount is specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, this mount can be used in other applications as well.
The upper bracket is 4.6" long by 1" wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4" wide. If the lower clamp is omitted, the upper bracket will also serve as a flat mount for installations with a horizontal surface to bolt it to. Mounting bracket comes complete with the FireStik K-4 antenna stud. (Lug terminal connection).
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik SS134A stainless steel mount is specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, this mount can be used in other applications as well.
The upper bracket is 4.6" long by 1" wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4" wide. If the lower clamp is omitted, the upper bracket will also serve as a flat mount for installations with a horizontal surface to bolt it to. Mounting bracket comes complete with the FireStik K-4A antenna stud, (for PL259 connection).
For further product information click on the product image (on the left) or the underlined product title (above).
Looking for a heavy-duty stainless steel flat mount? This mount offer numerous mounting options. The bracket is 2" wide, 5" long and 0.10" thick stainless steel. There are four mounting holes and enough stainless steel hardware supplied to fill each one. The stud mount hole has a full 1" set back in case you want to replace the stud with a FireStik dome mount. If you can find a flat spot on your vehicle that will set still long enough for you to drill a couple of holes in it, you'll end up with a great antenna mount.
For further product information click on the product image (on the left) or the underlined product title (above).
Looking for a heavy-duty stainless steel flat mount? This mount offer numerous mounting options. The bracket is 2" wide, 5" long and 0.10" thick stainless steel. There are four mounting holes and enough stainless steel hardware supplied to fill each one. The stud mount hole has a full 1" set back in case you want to replace the stud with a FireStik dome mount. If you can find a flat spot on your vehicle that will set still long enough for you to drill a couple of holes in it, you'll end up with a great antenna mount.
For further product information click on the product image (on the left) or the underlined product title (above).
The FireStik WSB4 mounting stud attaches to a chrome plated swivel bracket allowing the antenna angle to be adjusted perpendicular to the mounting plane. This allows the antenna angle to be corrected with the mount on the left or right edge of a trunk, hatchback or bumper. Hardware and mounting stud included. Crimp on connections.
For further product information click on the product image (on the left) or the underlined product title (above).
Welcome to CB Radio Store 
