Search Results

Good arteries are important to your heart like good coax cable is important to your radio. FireStik's single lead cable assemblies are made from FireStik RG-58A/U, Fire-Flex coaxial cable. They can be used on any single antenna installation. This includes CB Radio, scanner, 2-meter, and 10-meter.

The K-8 cable is 18' long. One end is terminated with a PL-259 type connector to match the connector on your radio and the other end is terminated with a ring terminal on the center conductor and a spade connector on the shields. Can be used with FireStik K-4 or R-4 stud mount and any mount that uses either one of the lug-style stud terminal mounts

For further product information click on the product image (on the left) or the underlined product title (above).

Good arteries are important to your heart like good coax cable is important to your radio. FireStik's single lead cable assemblies are made from FireStik RG-58A/U, Fire-Flex coaxial cable. They can be used on any single antenna installation. This includes CB Radio, scanner, 2-meter, and 10-meter.

The FireStik K-8A cable is 18' long. Both ends of this cable assembly is terminated with a PL-259 type connector. This cable is designed to be used with FireStik's K-4A or R-4A antenna studs or any mount that uses a SO-239 stud mount.

For further product information click on the product image (on the left) or the underlined product title (above).

With the FireStik K8R18 you can have FireStik's high quality Fire-Flex coax, with the greatest mount termination on the market, complete with the antenna stud mount. All in one nice package. The design of the coax termination requires a longer bolt (included) to properly secure the antenna stud. (If you use a standard stud mount on the Fire-Ring connector you will come up 4 or 5 threads short of a secure).

The PL259 connector is NOT soldered to the coax thus eliminating 1/2" holes or larger for installation through firewalls and the like. Now you will be able to downsize the holes to the size of the coax cable itself. The coax end is already prepared to just slide in the PL259 and solder.

The Fire-Ring connector is weatherproof, low-profile and easy to install. The Fire-Ring can be installed below the mount surface or on top of the mount surface. The small amount of room that the Fire-Ring utilizes make it the perfect choice for use under headliners or installations where space is limited. REQUIRES FireStik K4R FireRing Stud Mount, pictured.

For further product information click on the product image (on the left) or the underlined product title (above).

Now you can have FireStik's high quality Fire-Flex coax, with the greatest mount termination on the market, complete with the antenna stud mount. All in one nice package. You won't find a more trouble free, low-profile connection anywhere. All of the coax connections are soldered and protected from the elements. This termination is designed to fit any 1/2" hole. It also has a built in nylon shoulder washer to keep it centered and short free.

The small amount of room that the Fire-Ring utilizes make it the perfect choice for use under headliners or installations where space is limited.

For further product information click on the product image (on the left) or the underlined product title (above).

Good arteries are important to your heart like good coax cable is important to your radio. FireStik's single lead cable assemblies are made from FireStik RG-58A/U, Fire-Flex coaxial cable. They can be used on any dual antenna installation. This includes CB Radio, scanner, 2-meter, and 10-meter.

The Firestik K9 Dual Coax With Ring Terminals dual lead, co-phase harness assemblies are made from FireStik's RG-59A/U, Fire-Flex coaxial cable. Designed specifically for dual antenna system configurations.

The FireStik K-9 co-phase harness utilizes two 18' leads. One end is terminated with a PL-259 type connector to match the connector on your radio and the other two ends are terminated with ring terminals on the center conductors and spade connectors on the shields. This cable should be used in conjunction with FireStik's K-4 or R-4 stud mounts and any mounts that uses either of the lug-style stud mounts.

For further product information click on the product image (on the left) or the underlined product title (above).

Good arteries are important to your heart like good coax cable is important to your radio. FireStik's dual lead cable assemblies are made from FireStik RG-58A/U, Fire-Flex coaxial cable. They can be used on any dual antenna installation. This includes CB Radio, scanner, 2-meter, and 10-meter.

The FireStik K-9A co-phase harness is made with two 18' leads. All three ends of this cable assembly is terminated with PL-259 type connectors. This cable is designed to be used with FireStik K-4A or R-4A antenna studs and any mounts that use SO-239 stud mounts.

For further product information click on the product image (on the left) or the underlined product title (above).

Wilson Antenna 18' super mini 8 coaxial cable features Belden tinned 97% shielded copper with clear cover, 50 OHM cable Amphenol plug to FME plug connectors with weatherproof vinyl boot. A FME PL259 connector provides the ability to have a much small hole for coax cable routing. Make it the best choice for an 'EZ-Install'. No soldering joints to complete and no tools needed.

For further product information click on the product image (on the left) or the underlined product title (above).

Wilson Antenna 18' super mini 8 Co-Phased coaxial cable features Belden tinned 97% shielded copper with clear cover, 50 OHM cable Amphenol plug to plug connectors with weatherproof vinyl boots. Ideal for dual antenna configurations.

For further product information click on the product image (on the left) or the underlined product title (above).